Save your changes.Ħ) Now navigate to Configuration > Network > Advanced Settings > Platform Access. Enter the IPv4 Default Gateway in the Preferred DNS Server field and enter 8.8.8.8 in the Alternate DNS Server field. Near the bottom of the page you will see the DNS Server section. Make a note of the IP Address for your selected device,Ģ) Open Internet Explorer and go to the IP address from the previous step.ģ) Log in to the device using the username " admin" and the password that you have previously set on the device.Ĥ) Navigate to Configuration > Network > Basic Settings > TCP/IPĥ) On this page make a note of the IPv4 Default Gateway. If you are using IP cameras with no recorder then you will need to address this issue one camera at a time so select one camera and return to this step once completing the process for that camera. Select your NVR or DVR from the list of devices. If you want to use the menus on the NVR or DVR make sure you have it connected to a monitor or TV screen with the included mouse plugged in to the device.ġ) Open SADP Tool.If you wish to use a computer make sure you have SADP Tool installed.
This how-to article relates to Hikvision cameras. If you have attempted to connect your Hikvision equipment to Hik-Connect following How to Setup Hikvision DVR for Remote Viewing or How to View Hikvision Camera on laptop and have got stuck at the point of getting the device to appear online this guide will walk you through the most common solution. Hikvision hik-connect remote viewing Purpose of The Guide
0 kommentar(er)
